Product Description
Door Jamb 4 9/16" x 5/8" for a measured door opening
The Door Jamb 4 9/16" x 5/8" is a jamb component for coordinating an interior-door opening. Match its dimensions to the wall build-up, slab and machining schedule before requesting a quote.
Verified jamb details
4 9/16" x 5/8" Door Jamb: 4 9/16" x 5/8" x 7' or 8.5' Important Note: Dimensions may vary depending on the material of the profile. Drawings and dimensions are nominal - actual sizes and profile may vary slightly.
Confirm wall thickness and finished depth
Measure the finished wall thickness at several points, including drywall or other finish layers, and note any variation around the opening. Coordinate the jamb depth with the intended casing reveal and projection so adjoining trim can terminate cleanly.
Coordinate machining and opening requirements
Record the door width, height, thickness, handing and swing for each opening, plus hinge preparation, stop and bore requirements where applicable. Trim Depot may supply a slab or a knocked-down machined kit; it is not delivered as an assembled prehung unit.
Compare related door components
Review the complete door collection and coordinate the opening with available casings and backbands.
