Product Description
Wall Batten Colonial Chair Rail Cap in Solid Poplar (Unprimed) for measured wall layouts
The Wall Batten Colonial Chair Rail Cap in Solid Poplar (Unprimed) creates a dimensional feature-wall treatment. Use the verified profile details below to plan orientation, repeated spacing and the finished edges of the installation.
Verified profile details
Wall Batten Chair Rail Cap in FJ Poplar: 1 1/2" x 1 1/4" x 16'. For use with our recessed wall batten wainscoting. Fits a 5/8" thick top rail. This profile is made out of finger-joint poplar. Important Note: Dimensions may vary depending on the material of the profile. Drawings and dimensions are nominal - actual sizes and profile may vary slightly.
Plan orientation and termination points
Decide whether the profile runs vertically, horizontally or within selected feature areas before calculating quantities. Mark inside and outside corners, openings, outlets, switches and the points where the treatment meets baseboard, casing or crown moulding.
Estimate coverage from the visible layout
Measure each wall separately and plan full pieces around the most visible areas first. Confirm the usable face or repeat of the selected profile, then include a project-appropriate allowance for cuts, joints and pattern alignment. Keep offcuts assigned to shorter sections where the layout allows.
Compare wall-panel options
Browse more wall panels and accent-wall profiles or coordinate the treatment with trim and mouldings.
